Augustine's Evo V

[augustinemonteiro]

So I was able to successfully Flash the ROM back and forth today with test changes. The Ralliart SPorts ECU for the Evo 6 that was installed in my car comes with the new 7203F processor which is also found in the TME's and later model Evo 5/6 stock ECU's from time to time.

To flash to this new processor, you need to edit the evoVbase XML file found in C:\Program Files (x86)\OpenECU\EcuFlash\rommetadata\mitsubishi\evo.

On the fifth line of the file, you need to edit the memory model from H8539F to H8539FA and save it. In order to do this, you will need to run notepad as an administrator.

<rom>
<romid>
<xmlid>evo5base</xmlid>
<flashmethod>mitsukernel</flashmethod>
<memmodel>H8539FA</memmodel>

After doing this, select JDM Evo 5/6 under vehicles in ECUFlash as normal and you will be able to read and write to your ECU!

[augustinemonteiro]

Here's my most updated Mod's list. Unfortunately I am still waiting to hear back from the tuners for the tune, they have absolutely horrible communication. I am all amped up and ready to go. Except the 3 port boost control solenoid needs to be installed.

- Ralliart Sports ECU Evo 6
- Ralliart Coilovers
- Greddy 3" FMIC with lower piping kit
- 5Zigen 2.75" cat-back with 3" decat
- Evo 9MR metal BOV
- HKS short ram intake pipe with Blitz Sus power filter and custom bumper cold air feed
- Custom intake heat shield
- AEM Failsafe with Wideband O2 sensor and boost gauge (currently running 11.5 AFR on WOT 3rd gear at full boost)
- NGK BR8ES Copper plugs (gapped to 0.018")
- GrimmSpeed 3-port EBCS(waiting till before the tune to install)
- Walbro 255 lph fuel pump.