Results 1 to 3 of 3

Thread: 2000 gtb bh5 legacy e-tune brakes

  1. #1

    User Info Menu

    Default 2000 gtb bh5 legacy e-tune brakes

    After a few years looking for domestic parts cross referencing I finally had to do my front brakes. Can't seem to find a good source for usm to jdm parts interchangeable except bg5 legs. So I ordered parts from rockauto based on another forum bookmarked years ago. Half right.

    Front rotors work off 2004 SUBARU IMPREZA 2.0L H4 Turbocharged
    ...Pads did not technically work. I mean I made them work... squealer was in the wrong spot (cut it off) and guide slide nubs were smaller. Same pad size etc. Just sloppy feeling when braking in reverse then forwards and back and forth. But solid non the less normal driving.

    To no surprise, went back onto rockauto and referenced the pics to compare to the ones on the car. Found 2002 Impreza 2.0 H4Turbo looked the same... won't know for sure until I wear these carbon ceramics down.

    Also ordered rear e-brake shoes from a 2005 SUBARU LEGACY 2.5L H4 Turbocharged. Ran outa patience today to see if they fit. Will try again tomorrow maybe.

    Any info on correct C.P.R.(caliper pads rotors) ebrake shoes would be helpful.. thanks 20191031_155545.jpg
    2000 Bh5 Legacy E-tune
    1989 Hardbody p/u sr20det
    1995 Justy GL

  2. #2

    User Info Menu

    Default

    Got the rear ebrake shoes done. 2005 subie leg 2.5 H4 turbo are a fit! Ordering rear pads rotors next...
    2000 Bh5 Legacy E-tune
    1989 Hardbody p/u sr20det
    1995 Justy GL

  3. #3

    User Info Menu

    Default

    You can cross reference everything on this site to make it a lot easier to find parts.

    https://subaru.epc-data.com/
    2001 CDM ITR #01-1324
    2018 Civic SI FC3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •